YORCO SCIENTIFIC UDYOG PRIVATE LIMITED
GST : 09AAACY1001E1ZX

Change Language

Call us now

07971550132

Steri Fully Automatic ETO Sterilizer With Cartridge Punching System

Steri Fully Automatic ETO Sterilizer With Cartridge Punching System Specification

Type
Fully Automatic ETO Sterilizer

Chamber Size
1100 x 600 x 600 mm

Chamber Thickness
4 mm SS 316

Outer Size
1320 x 810 x 910 mm

Compressed Air
5-6 kg/cm

Door Type
Single/Double Hinged Door

Design Pressure
2.5 kg/cm

Working Pressure
1.5 kg/cm

Design Temperature
60C

Heat Uniform
1C across Chamber

Insulation
High Density Mineral Wool/Glass Wool

Net Weight
Approx. 450 kg

Recording Parameters
Temperature, Pressure, Humidity, Cycle Time

Spraying Mode
Automatic/Manual Selection

Outer Trolley
Available

Inner Trolley
Available

Spraying Piping
SS 304/316 Stainless Steel

Steam
Steam Generator Integrated

Sterilizing Temperature
37C 57C

Working Temperature
40C 55C

Sterilization Time
1-4 hours adjustable

Temperature Scope
Room Temperature up to 60C

Piping System
High Integrity SS with Leak Proof Joints

Valves
Pneumatic, SS 316

Power Consumption
3-5 kW

Data Storage
USB Export Capability, 500 Cycle Memory

Control System
Microprocessor Programmable Logic Controller (PLC)

Application Areas
Medical Devices, Surgical Instruments, Hospital Equipment

Power Supply
3 Phase, 415V, 50Hz

User Interface
LCD Touch Screen Display

ETO Consumption
10-30 g per cycle, Based on load

Cartridge System
Automated Cartridge Holder with Sensor Punching

Installation
Floor Mounted with Anti-Vibration Feet

Gasket
Autoclavable Silicon Rubber

Leak Test
Self Diagnostic Leak Test Routine

Safety Features
Emergency Stop, Overpressure Alarm, Door Interlock

Material of Construction
Stainless Steel 304, GMP Compliant

Humidity Control
Automatic, Adjustable RH 40-80%

Cooling System
Integrated Air Circulation Fans

Cycle Validation
Integrated Biological & Chemical Indicator Ports

Chamber Shape
Rectangular

About Steri Fully Automatic ETO Sterilizer With Cartridge Punching System

The machine is equipped with positive pressure mechanical door locking system which must not allow user to open the door until the atmospheric pressure is achieved inside the chamber.

The machine is equipped with inbuilt steam generator.

The machine is able to maintain humidity in the chamber within the range of 90 to 95% automatically controlled by wet and dry humidity transducer system.

Pressure of the sterilant is controlled automatically through pressure sensor and pneumatically controlled valves.

The machine is able to automatically control the aeration phase of the cycle to remove residual gas from the chamber.

The Sterilizer has Hinged Single Door with shooting bolts locking system.

Door frame is strong & robust enough to ensure smooth door movement &consistency in alignment.

Door movement is smooth to ensure proper door alignment over a long period of time.

Door has Single safety lock, at least one mechanical and one electronic locking mechanism.

Catalytic convertor is provided to treat the ETO gas before draining.

Vacuum Pump is provided.

Advanced Control and Safety

This ETO Sterilizer integrates a microprocessor-based PLC for customizable cycle programming and real-time monitoring. Advanced safety features include emergency stop, overpressure alarm, and door interlock systems. The autoclave supports both single and double hinged doors, enhancing its adaptability and security in demanding healthcare environments.

Efficient Sterilization and Data Management

With an automated cartridge system and adjustable ETO consumption based on load, the sterilizer maximizes efficiency while maintaining safety. The user-friendly LCD touch screen display allows for seamless operation, while built-in data storage retains up to 500 cycles. USB export capabilities further streamline compliance and documentation processes.

Robust Construction and Versatile Application

Constructed with high-grade stainless steel 304 and 316, this sterilizer is durable and GMP compliant. Featuring a rectangular low-leak chamber, anti-vibration feet, integrated air fans, and high-density insulation, it is suitable for sterilizing various medical and hospital equipment. Its flexible cycle settings accommodate a wide array of sterilization needs.

FAQs of Steri Fully Automatic ETO Sterilizer With Cartridge Punching System:

Q: How does the automated cartridge punching system work in the Steri ETO Sterilizer?

A: The automated cartridge holder uses sensors to accurately punch and deploy ETO cartridges for each sterilization cycle. This system ensures precise dosing of ethylene oxide, resulting in effective sterilization and consistent results.

Q: What safety features does this fully automatic ETO sterilizer offer?

A: The sterilizer incorporates several safety features, including an emergency stop, overpressure alarm, door interlock to prevent opening during cycles, and robust leak test routines. These measures collectively ensure user and product safety.

Q: When should I use the integrated cycle validation ports?

A: Integrated biological and chemical indicator ports should be used for cycle validation at the start of new processes, after maintenance, or periodically as required by your facilitys protocols to verify sterilization effectiveness.

Q: Where can the Steri ETO Sterilizer be installed?

A: Designed for floor-mounted installation, the sterilizer comes equipped with anti-vibration feet for stability. Its compact size and design make it suitable for hospitals, medical device manufacturing units, and research laboratories.

Q: What is the typical process for running a sterilization cycle?

A: The process involves loading items onto the trolleys, setting desired parameters via the touch screen, inserting an ETO cartridge, and initiating the cycle. The machine manages temperature, humidity, and pressure, and automatically tracks critical data for each run.

Q: How is data managed and exported from this ETO sterilizer?

A: Sterilization records, including temperature, pressure, humidity, and cycle details, are stored for up to 500 cycles. Data can be easily exported via the USB port, enabling straightforward compliance reporting and record management.

Q: What are the main benefits of using this fully automatic sterilizer?

A: Key benefits include reliable and validated sterilization, compliance with GMP standards, robust safety systems, automation that reduces manual errors, and comprehensive data management for audit readiness.