YORCO SCIENTIFIC UDYOG PRIVATE LIMITED
GST : 09AAACY1001E1ZX

Change Language

Call us now

07971550132

Steri Horizontal Cylindrical Automatic Steam Sterilizer

Steri Horizontal Cylindrical Automatic Steam Sterilizer Specification

Type
Horizontal Cylindrical Automatic Steam Sterilizer

Chamber Size
950 mm diameter x 1900 mm length

Chamber Thickness
6 mm

Outer Size
1800 mm x 1400 mm x 1520 mm

Compressed Air
Minimum 6kg/cm

Door Type
Automatic sliding

Design Pressure
2.5 kg/cm

Working Pressure
1.2 kg/cm

Design Temperature
150C

Heat Uniform
2C

Insulation
High density mineral wool

Net Weight
1200 kg

Recording Parameters
Digital printout cycle time, temperature, pressure

Spraying Mode
Rotary spray system

Outer Trolley
Stainless Steel 304 grade trolley

Inner Trolley
Perforated Stainless Steel 304 frame

Spraying Piping
Stainless Steel 316

Steam
Saturated steam, pressure supplied externally

Sterilizing Temperature
121C to 134C

Working Temperature
121C 134C

Sterilization Time
Programmable 0 to 99 minutes

Temperature Scope
Up to 150C

Piping System
Tri-clover with gaskets

Valves
Sanitary automatic diaphragm valves

Power Consumption
7.5 KW

Safety Features
Pressure Safety Valve, Door Interlock, Overheat Cutoff

Application
Hospitals, Laboratories, Pharmaceutical & Research Institutes

Control System
PLC with HMI Touch Panel

Gasket
Silicon, Autoclavable

Chamber Material
High Grade Stainless Steel (SS304/SS316)

Compliances
cGMP, CE Certified

Power Supply
220V/380V 50Hz, 3 Phase

Test Ports
Provided for Validation

Door Gasket
Inflatable, Silicon

Surface Finish
Mirror Polished (Chamber), Matt (Exterior)

Drain System
Fully Automatic

Display
Digital/LED

Water Supply
Automatic Filling

Noise Level
<70 dB

Sterilization Cycles
Pre-set and Customizable

About Steri Horizontal Cylindrical Automatic Steam Sterilizer

The Machine automatically detects any air/steam leakage in chamber.
The Machine automatically detects any steam penetration barriers, inadequate air removal.
Machine air filter is capability to remove 99.97% pathogens.
Machine has 6 pre-programmed cycles.
The machine has user variable cycle where user can customize the temperature settings, pressure settings and vacuum pulse settings.
The sterilizer setting is password protected.
The date and time setting is password protected and User is able to update date and time settings on the screen for better record keeping.
The Machine is equipped with Faulty Sensor Detection system and user is visually notified of the same.
The machine is equipped with Door lock detection system, in case; if the door is not closed properly the user must be notified.
The machine is equipped with temperature detection system and the user will be notified in case the machine fails to reach the set temperature or if the temperature overshoots.
The machine is equipped with water detection system. The user will be notified in case the water level is not optimum for regular machine operation.
The user is record the progress of the sterilization cycle in real time there fore online real time printing facility will be provided.
The Machine has Printer facility.
The Sterilizer has Hinged Single Door with shooting bolts locking system.
The Sterilizer is fitted with analog compound gauge to measure the pressure and vacuum of chamber.
Machine is equipped with Vacuum Pump: For component and drying cycle. A vacuum pump is water ring vacuum pump which requires seal water.
The machine is equipped with air filter which removes 99.95% of the particulate matter of size 0.3 m so the drying does not compromise the sterility of the sterilized load.
Sterilizing Temperature :121^oC - 134^oC
Sterile Hold Time: Min. 15 Min.-Maximum as required

Advanced Sterilization Control

Featuring a PLC-based control system with a responsive touch panel interface, the Steri steam sterilizer allows intuitive operation and monitoring. Users can select from pre-set or custom sterilization cycles, precisely adjusting time and temperature parameters to suit diverse loads and requirements. The digital/LED display and automated data recording enable easy validation and traceability of every cycle.

Superior Build and Safety

Constructed with high-grade stainless steel (SS304/SS316), this sterilizer offers robust durability and hygiene. Safety measures such as pressure safety valves, door interlocks, and an overheat cutoff safeguard both the operator and the environment. The chambers mirror-polished finish and insulated body minimize energy loss and facilitate thorough cleaning.

Seamless Integration and Application

Ideal for hospitals, pharmaceutical units, laboratories, and research institutes, the unit operates efficiently with automatic water filling, programmable cycles, and a user-friendly interface. Its compact footprint and automated door and trolley systems save valuable space and manpower, contributing to productivity and operational safety.

FAQs of Steri Horizontal Cylindrical Automatic Steam Sterilizer:

Q: How does the automatic control system improve the sterilizing process?

A: The PLC with HMI touch panel offers precision control over each sterilization cycle. Operators can customize or select preset programs, monitor real-time parameters, and record data, leading to reliable sterilization outcomes and easier compliance with regulatory standards.

Q: What safety features are included in the Steri horizontal sterilizer?

A: Safety is enhanced through pressure safety valves, door interlock mechanisms, overheat cutoff, and a fully inflatable silicon door gasket. These features ensure operational protection against pressure surges, overheating, or unintended door opening during cycles.

Q: When should I select the custom sterilization cycle option?

A: Custom sterilization cycles are ideal when processing instruments or materials that require specific temperature and duration settings not covered by preset programs. This flexibility is especially useful for research, specialty medical, or pharmaceutical applications.

Q: Where can this sterilizer be installed and used efficiently?

A: The sterilizer is suited for installation in hospitals, laboratories, pharmaceutical manufacturing, and research institutes. Its design accommodates rigorous routines, and its automated features support continuous, high-throughput environments.

Q: What is the process involved in operating the sterilizer?

A: Operation begins with loading materials onto the stainless steel trolleys, closing the automatic sliding door, and selecting the desired cycle on the HMI touch panel. The system automatically manages water filling, heating, sterilizing, and draining. All cycle parameters are monitored, recorded, and printed digitally for documentation.

Q: How does the rotary spray system and uniform heat distribution benefit sterilization?

A: The rotary spray system ensures even distribution of saturated steam, while heat uniformity of 2C guarantees consistent sterilization, reducing the risk of incomplete decontamination and aiding thorough validation of the process.